Flush frames are designed to be installed as part of the wall framing sequence for exterior and interior walls of wood stud,steel stud and masonry construction. Frames are manufactured from commercial-quality carbon steel in cold-rolled,A653/A653M galvannealed and G90 galvanized steel. Flush frame corners in 16 and 14 gauge may lock together by bendingover four integral tabs, and may also be welded and ground smooth
Multiple use frames have a jamb profile similar to drywall frames but are designed to be installed as part of the wall framing sequence. These frames are available in 16 and 14 gauge cold-rolled, A60 galvannealed or G90 galvanized steel.
Drywall (DW and K Series) frames are designed to be installed in rough openings after the wall is constructed. They can be installed in minutes and can be relocated without damage to the frame. Drywall frame corners lock together once the frame is assembled. The tab design prohibits the head from raising, and keeps the head and jamb members in the same panel.
© Allegion plc, 2018 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer